|
So ive had pretty good luck with the Badlands Wireless winch remotes. So i bought a second, and wired it into the bronco! Hidden here in front of the battery:  and some simple wiring to the contactor:  The power source is the switched output of my disconnect, that way the receiver only has power when the winch does. So from there i directed my attention to the dash. Removed the pocket from the dash panel, and made a switch panel (out of a cheap plastic tray from walmart) to take its place:   The finished product; i also added a hole for in-cab winch control, and that little LED is for my fan controller, altho we'll talk about that in another post  Laying out the wiring. I bought 12 conductor cable, so everything would be bundled together, and color coded: Youll note 3 extra wires. The brown is going to be supplied with a key hot, which will turn on certain accessories (such as the OBA & elec fan) as soon as i turn the key on. The 2 black wires are spares, just in case i decide to add an additional switch down the road; itll all already be wired up and ready to go, ill just have to stuff a switch in somewhere and tie in to those wires.  Going in for the final install:  ...and done!  I routed the harness thru the firewall where the cruise control used to enter, so no extra holes in the firewall. For now the cable is just laying across the engine bay, but the next step (starting tomorrow hopefully) will be to wire up the relay box for all this stuff! Comments are closed.
|