|
Ok so lets move into the interior for now. I needed to get this mess cleaned up. Its wiring for the door + speakers, dome light switch, elec tcase ecu and the heater box. So i disassembled the harness and routed them all separately to clean this corner up a bit.  Much nicer!  So now heres the reason im working on cleaning up the kick panels. Im retrofitting the 80-86 floor vents in this thing!  The 4 screws that install it hold it together, but theres also 2 plastic pins that glue the assy together. So we have to carefully disassemble it, so we can re-glue the pins later  The whole thing broken down   Parts painted, and i bought cheap foam and weather stripping from Lowes to replace all the dryrotted seals  the halves clamped back together, so i could re-epoxy the two pins  all done, with the correct kick panel  ...and finally, installed!  I hope this was worth the effort, i guess time will tell! |