Welding is basically done!
Mocking up window for fairlead:
This Powerwagon winch has an usual handle (it was also cut down at least once before i got the winch). It also doesnt clear the bumper.
Pulled the winch apart to modify handle, as i dont want to cut a notch on the bumper. The inside is nice and clean, and recently greased too
i straightened the handle and reassembled to mock up:
Then bent a 90º in it in a different place.
Tomorrow im going to do some touchup on a couple welds & corners, then pull the cap back off the winch to reseal it (it still needs rtv on it). Then ill throw the whole thing back on the bronco for some proper 'finished pics'!