So i got my electric fan installed:
I used to use the large volvo fan, but im switching to the Windstar fan, since it fits our radiators so much better:
Did some minor trimming here to clear the upper radiator hose:
I had to trim the shroud similarly for the lower hose, but apparently i dont have a pic of it.
I was trying to figure out how to mount it to the radiator, and i came up with this:
Its 2x2 angle iron trimmed to fit the radiator. Bolts to the top and bottom of the radiator using existing holes, and then i used 4 removable body panel pins to hold the fan to the brackets
Here's hoping it works! I dont have my fan controller yet, so i havent tested it!